Cable Trays

Cable Trays

Ramesh Earthing Corporation  is the leading Suppliers perforated cable trays with accessories. Cable Trays are available in different sizes as per the customer specifications. We Supply cable trays in the following thicknesses – 1.2 mm, 1.5 mm, 1.6 mm, 2.0 mm, 2.5 mm, and 3.0 mm & width – 40 mm to 1000 mm, cable trays are available in different finishes like Hot Dip Galvanized, Pre Galvanized, Powder Coated, etc.

The cable tray accessories for perforated type cable trays are vertical bends, horizontal bends, inside bends, outside bends, reducers with radius 50,100,150,300, 600, 900 are available.

Advantages of Cable Trays:-

  • Cost Saving
  • Design cost Savings
  • Dependability
  • Installation cost and time saving.
  • Material Savings
  • Maintenance Savings
  • Space Savings

Cable Tray Perforated Type

Cable Tray – Perforated Type is ideal to install large volume of heavy duty power cables. Perforation make full free air rating of cable, higher current flow can be achieved at the same cross section. Overheating and consecutive damaging of cable is avoided, coupler holes in side guarantees easy connecting of cable trays to each other, Cable trays can be manufactured in Hot Dip Galvanized Finish (Galvanizing As Per Is – 2626), Pre – Galvanized Finish (Material As Per Is – 277), Powder Coating Finish (Powder Coating As Per Is – 101), Stainless Steel Grade – As Per 316, 304 & in Aluminium – Commercial Grade Finish.

G.i Cable Trays perforated & Trunking & Ladder Type 50x50x18swg.16swg.14swg.12swg to 1000×50 x18swg.16swg.14swg.12swg

Perforated Cable Trays Accessories

 

All accessories can be manufactured in Hot Dip Galvanized Finish (Galvanizing as per Is – 2626), Pre-Galvanized Finish (Material as per Is – 277), Powder Coating Finish (Powder Coating as per Is – 101), Stainless Steel Grade – as per 316, 304 & in Aluminium – Commercial Grade Finish. Height of varies from 25mm to 150 mm, Width of varies from 50 To 1000 Mm, Thickness of Horizontal Bend – Perforated Type ranging from 1.2mm to 3mm.

Horizontal Bend

Horizontal Bend – Perforated Type are mainly use in combination with perforated type of cable trays to route the cables in 90 degree where two wall are conjoining ,Our product design allows the cable to route properly and chamber of bend take care of cable not to worn out , peel off or get damage while laying of cables.

‘T’ Bend

‘T’ Bend – Perforated Type is suitable for joining cable trays in three directions at 90 degree intervals in the same plane. Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cables.

Cross Bend

Cross Bend-Perforated Type is mainly use for laying the cable horizontally which allows the cable to route from four ends. Our product design allows the cable to route properly and chamber of bend take care of cable not to worn out, peel off or get damage while laying of cables.

Vertical Bend Outside

Vertical Bend Outside – Perforated Type is mainly use in combination with perforated type of cable trays to route the cable where the direction changes to a different plane.

Vertical Bend Outside – Perforated Type changes direction downward from the horizontal plane. Our product design allows the cable to route properly and chamber of bend take care of cable not to worn out, peel off or get damage while laying of cable.

Vertical Bend Inside

Vertical Bend Inside – Perforated Type is mainly used in combination with perforated type of cable trays to route the cable where the direction changes to a different plane.

Vertical Bend Inside – Perforated Type changes direction upward from the horizontal plane. Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out , peel off or get damage while laying of cable.

Reducer Central

Reducer Central – Perforated Type are mainly used in combination with perforated type of cable trays to route the cable where cable tray is suitable for joining cable trays of different widths in the same plane. Has Two Symmetrical Offset Sides.

A Reducer Central – Perforated Type has two symmetrical offset sides. Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cable.

Reducer Left Hand

Reducer Left Hand-Perforated Type are mainly used in combination with perforated type of cable trays to route the cable which is suitable for joining cable trays of different widths in the same plane.

A Reducer Left Hand-Perforated Type when viewed from the large end has a straight side on the left. Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cable.

Reducer Right Hand

Reducer Right Hand – Perforated Type are mainly used in combination with perforated type of cable trays to route the cable which is suitable for joining cable trays of different widths in the same plane.

A Reducer Right Hand – Perforated Type when viewed from the large end has a straight side on the left. Our product design allows the cable to route properly and chamfer of bend take care of cable not to worn out, peel off or get damage while laying of cable.

1
×
Inquiry of Cable Trays